Home/Advice/Oak Frame Extension Cost per m2 in Somerset: A Realistic Guide
Advice

Oak Frame Extension Cost per m2 in Somerset: A Realistic Guide

Oak frame extensions are popular across Somerset and its neighbouring counties, especially on period cottages, farmhouses and listed buildings where the timber suits the setting. They are rarely the cheapest way to add space, though, and the price per square metre can vary a lot. This guide explains realistic ranges, what pushes the figure up or down, and how to budget sensibly before you commit.

Published 16 November 2026

Realistic cost ranges per square metre

For a finished, weathertight and fully fitted oak frame extension in Somerset, Devon, Wiltshire or Dorset, most projects land somewhere between £3,000 and £5,000 per m2 of internal floor area. Simple single storey garden rooms with modest glazing sit at the lower end. Heavily glazed, vaulted or two storey designs, and anything attached to a listed building, often go beyond £5,000 per m2.

The oak frame itself is usually only part of the total. Supplying and raising a green oak frame might account for roughly a quarter to a third of the build cost, and the rest goes on foundations, the infill panels or glazing, the roof, services, finishes and professional fees. That is why a quote for the frame alone can be misleading when you are trying to work out the full project cost.

Smaller extensions often cost more per m2 than larger ones, because fixed costs such as design, structural engineering, site set up and connecting to the existing house are spread over fewer square metres.

What drives the price up or down

No two oak frames are the same, so the figure for your project will depend on a handful of key decisions.

Listed buildings, conservation areas and planning

Many oak frame extensions in this region are added to Grade II or Grade I listed homes, or sit in conservation areas. Listed building consent usually brings extra survey work, heritage statements and more detailed drawings, and conservation officers may set conditions on materials, glazing details and how the new frame meets the historic fabric. A glazed link between the old building and the new frame is a common solution, but it needs careful detailing and adds cost.

For church bodies, any addition to a church building will normally need a faculty as well as any secular consents, and the DAC will expect the design and materials to respect the building. Allow time in the programme for this as well as money in the budget.

How to budget sensibly

Once you have a rough idea of the floor area, multiply it by a realistic rate per m2 for the type of extension you have in mind. Then add professional fees, VAT where it applies, and a contingency. For older or listed properties a contingency of 10 to 15 percent is sensible, because opening up historic walls often turns up surprises.

A fixed fee for project management, agreed at the start, makes the overall budget easier to control, because you know what the management side will cost however the build goes. Whoever you appoint, ask for a breakdown that separates the frame, groundworks, glazing, roof and finishes so you can see where the money goes and where savings might be made.

If you are working with an architect, getting a contractor involved early can help keep the design within budget. Small changes to glazing layout or roof shape at drawing stage can save significant sums later without losing the character of the oak.

Questions

Asked and answered

Is an oak frame extension more expensive than a standard block and brick extension?

Usually, yes. A comparable masonry extension often costs less per m2, but oak offers character, large glazed openings and a better fit with period and listed buildings, which many clients feel justifies the difference.

Do I need planning permission for an oak frame extension in Somerset?

It depends on the size, position and the property. Some smaller extensions fall under permitted development, but listed buildings, conservation areas and larger schemes will need consent, so check with your local planning authority or architect early.

How long does an oak frame extension take to build?

The frame itself can often be raised in a few days once it is made, but the whole project, including groundworks, glazing, roofing and finishes, typically takes several months. Consent timescales for listed buildings or faculty applications should be added on top.

Related

More from DWL Construction

Contact

Tell us about your project

PhoneCall us
Email 
CoverageSouth West England: Somerset, Devon, Wiltshire & Dorset
ResponseWe reply to every enquiry within one working day
No obligation. We will come back to you within one working day.